TThe case of the amp section of The Perfect Match is machined from a solid block of aluminum to avoid interference and microphonic effects. Despite double mono construction, the signal paths are extremely short, so that the signal remains as pure as possible. The Current Input Design always makes the optimum adjustment for the pickup system. The gain is easily adjusted by a jumper. The external analogue power supply is shielded by a solid housing.
The Perfect Match sounds incredibly dynamic and makes exciting music
The Perfect Match –
Technical Data
• Amplification depending on Cartridge impedance Ri: | |
S/N LOW GAIN: | 74dB Ri=12 Ohm |
S/N HIGH GAIN: | 79dB Ri=12 Ohm |
Signal to Noise Ratio: | >=75 dB (400uV/1kHz/12Ohm) |
Distortion: | <0.02% |
RIAA equalization: | aktive zweistufige Entzerrung |
Input impedance: | Stromeingang virtual 0 Ohm |
Output impedance: | 100 Ohm |
Output voltage: | max- 8 Volt |
Weight: | 3.3lbs Phono, 4.4lbs PSU |
Dimensions : | HxWxD 2.3×8.5×2.6‘‘ Phono / 2.3×5.5×8.5‘‘ PSU |
Recensioni
Ancora non ci sono recensioni.