Parasound Halo Integrated

Nuovo

• Latest generation ESS Sabre32 Reference DAC (ES9018K2M)
        • Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
        • USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
        • Windows USB drivers for ASIO & WASAPI - install instructions here
        • Mac OS does not require any drivers
        • Coax and optical accept PCM up to 192kHz/24-bit
        • Analog bass management with high & low pass crossovers
        • Home theater bypass input for surround sound integration
        • Front panel subwoofer level control
        • Dedicated high current headphone amplifier (TI TPA6120)
        • Phono for MM & MC with 100 Ω or 47k Ω load
        • Front panel Aux input with automatic +12 dB gain stage
        • 5 pairs RCA line level Analog inputs
        • 1 pair XLR balanced Analog input
        • Balanced XLR and RCA left and right preamp outputs
        • 1 balanced XLR and 2 RCA subwoofer outputs
        • Bass & treble controls with relay bypass from remote or front panel
        • Rear panel IR input and IR loop output jacks
        • 12 Volt input and output to triggers
        • Back-lit remote control with discrete buttons
        • 0.5w standby power consumption meets Energy St

DISPONIBILE PER L'ASCOLTO.

Maggiori dettagli

2 700,00 €

3 650,00 €

-950,00 €

Dettagli

   Power Amp Features


        • 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
        • 240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
        • Power amp circuit topology designed by legendary John Curl
        • Direct amplifier input to bypass preamp section
        • High bias class A/AB operation
        • Oversized shielded toroid power transformer
        • Dual-mono power supply and power amplifier
        • 40,000uF power supply filter capacitance
        • Matched JFET input stages and MOSFET driver stages
        • 12 high voltage/high current bipolar output transistors
        • Heavy-duty 24k gold-plated 5-way speaker binding posts
        • Over temp and short circuit relay protection

  • Power Output - Both channels driven
       (0.05% THD, RMS, 20 Hz - 20 kHz)
       160 watts x 2 @ 8 Ω
       240 watts x 2 @ 4 Ω
  • Power Output - Both channels driven
       (0.9% THD, RMS, 20 Hz - 20 kHz)
       180 watts x 2 @ 8 Ω
       270 watts x 2 @ 4 Ω
  • Current Capacity
       45 amps peak per channel
  • Frequency Response
       10 Hz - 100 kHz, +0/-3 dB
  • Total Harmonic Distortion (THD)
       < 0.01 %, average listening levels
       < 0.05 %, 160 watts x 2 @ 8 Ω
  • Interchannel Crosstalk
       > 50 dB at 20 kHz
       > 70 dB at 1 kHz
  • Signal to Noise Ratio - IHF A-weighted
       Line in: - 103 dB (input shorted)
       Digital in: - 106 dB
  • Amplifier Damping Factor
        > 800 at 20 Hz
  • Preamp Stage Input Sensitivity
       300 mV in for 1 V at Pre Out jacks
       Total Preamp Stage Gain: 10 dB
       Max Output Unbalanced: 7 V
       Max Output Balanced: 9 V
  • Power Amplifier Stage Sensitivity
       1 V at Bypass/Amp In for 28 V at Speaker Out
       Total Amp Stage Gain: 28 dB
  • Phono Stage Sensitivity / Input Impedance
       MM: 35 dB / 47 k Ω
       MC: 52 dB / 47 k Ω or 100 Ω
  • High & Low Pass Crossover Slopes
        12 dB per octave
  • Supported DAC Sampling Rates
        USB: up to 384 kHz / 32-bit PCM
           DSD Native: DSD 64, DSD 128, DSD 256
           DSD over PCM (DoP) at 384 kHz
        Coax/Opt: up to 192 kHz / 24-bit PCM
  • Digital to Analog Converter
        ESS Sabre32 Reference ES9018K2M
        384 kHz / 32-bit
  • USB 2.0 Controller
        VIA VT1731, 384 kHz / 32-bit
  • Headphone Amplifier
        Texas Instruments TPA6120A
        Output Impedance 10 ohms
  • XLR Pin Identification
       1 = Ground (Shield)
       2 = Positive
       3 = Negative (Return)
  • Input Impedance
       Unbalanced: 24 k Ω
       Balanced: 100 k Ω per leg
  • Output Impedance
       Unbalanced: 100 Ω
       Balanced: 470 Ω per leg
  • Dimensions
       Width: 17-1/4" (437 mm)
       Depth: 16-1/4" (413 mm)
       Depth, with cables 17-1/4" (437 mm)
       Height, with feet: 5-7/8" (150 mm)
       Height, without feet: 5-1/4" (133 mm), 3U
  • Net Weight
       33 lb. (15 kg)
  • Shipping Weight
       45 lb. (20.4 kg)
  • Power Requirement
       Standby: 0.5 watts
       Idling power: 70 watts
       Maximum: 750 watts
       110-125 VAC 60 Hz or 220-250 VAC 50 Hz
           AC mains voltage is set on rear